N2Lok

N2Lok Ball Bearing Pin Hinge – 100x75mm – Stainless Steel

The N2Lok Ball Bearing Pin Hinge – 100x75mm – Stainless Steel is a stainless steel door handle set supplied as a pair for internal doors in homes, apartments, offices and light commercial fit-outs.

Stainless steelMaterial1 FinishesFinish OptionsPairSupplied As

Function guide: Passage (non-locking) for doors that dont lock; Privacy (turn/snib with emergency release) for bedrooms and bathrooms; Entrance (keyed) for lockable internal or entry doors. The latch, mortice lock, privacy bolt or cylinder is selected to suit and sold separately.

N2Lok Warranty

7-Year Mechanical Warranty

Against defects in materials and workmanship under normal use, when correctly installed.

5-Year Finish Warranty

On the applied finish with reasonable care. Living brass finishes patina naturally over time.

What’s in the Box

Pair of N2Lok levers or knobs on roses/backplates
Spindle
Fixing screws
Keys and cylinder where the function is keyed

The tube latch, mortice lock, privacy bolt or cylinder is chosen to suit and is sold separately unless supplied as a kit.

How to Build Your Set

Step 1 Choose your door type. Single internal door? Continue to Step 2. Double/French doors? See Step 3.

Step 2 Choose your function. Passage add a tube latch (non-locking doors). Privacy add a tube latch plus privacy bolt (bedrooms, bathrooms). Entrance add a mortice lock and cylinder (Key/Thumb or Key/Key).

Step 3 Double doors. Order two sets or an active set plus a dummy set on the fixed (inactive) leaf and add flush bolts to the non-active leaf, commonly 300 mm at the top and 150 mm at the bottom.

Hinge guide. Use 2 hinges for standard internal doors and 3 for entrance or heavier doors. Ball-bearing hinges suit heavier, high-use doors; match the hinge finish to your handle finish.