Tradco

Tradco Td2628 Polished Nikel Loose Pin Hinge 100 X 75 Mm

Product code (SKU): 2628

This is a Tradco loose pin hinge in solid brass. Size 100 75 mm.

Solid BrassMaterialPolished Nickel Thickness: 3mm Includes: Matching screwsFinish

Hinge Type: Loose pin hinge

The pin can be withdrawn so the door lifts off without unscrewing the hinge. Internal use handy for bathrooms and for removing doors during work.

Hinge types explained:

Hinge type	What it does
Parliament hinge	Projects the door clear of the frame or architrave so it can swing back fully against the wall used where a door must open 180 or clear deep reveals.
Ball bearing hinge	Bearings between the knuckles carry the load, reducing friction and wear. Best for heavy and high-use doors, including entrance doors.
Loose pin hinge	The pin can be withdrawn so the door lifts off without unscrewing the hinge. Internal use handy for bathrooms and for removing doors during work.
Fixed pin hinge	The pin is fixed in the knuckle. A reliable all-rounder for most internal doors.
Butt hinge	The standard door hinge, mortised into the door edge and frame.
Lift-off hinge	The leaves separate so the door lifts off. Handed order left or right hand to suit the door.

Three hinges per door is standard for internal and entrance doors. Heavier and taller doors may require a fourth.

Specifications

Material	Solid Brass
Finish	Polished Nickel Thickness: 3mm Includes: Matching screws
Warranty	10-Year Mechanical Warranty

Warranty

10-Year Mechanical Warranty

Covers defects in materials and workmanship under normal use, when correctly installed.

Lifetime Finish Warranty

Applies to plated finishes Chrome Plated, Polished Chrome, Satin Chrome, Polished Nickel and Satin Nickel.

Living finishes

Unlacquered, antique and aged finishes such as Antique Brass, Antique Copper, Polished Brass, Satin Brass and Rumbled Nickel are living finishes. They age and patina naturally over time and are excluded from finish-defect cover.

Add a Review

Your email address will not be published. Required fields are marked *