TheS-5-S(S stands for snap-lock) is a non-penetrating, standing seam metal roof (SSMR) clamp. The S is designed for most popular verticalsnap-together profiles— typically with vertical dimensions of 1.5 (38 mm) and 1.75 (44 mm).

TheSis also the perfect solution for traditional,single-fold (angle-seam)horizontal profiles of 1 (25 mm) and 1.5 (38 mm) seam height dimensions and all similar seam types.

TheS Miniclamp is a more economical solution for lighter duty attachments where Herculean holding strength is not required.

All standard and Mini clamps undergorigorous load testing. Negative load normal-to-seam testing(pull-up) is performed on all Mini clamps, andparallel-to-seamtesting (drag load) is performed on all standard clamps.

Choose theS (or its Mini)to mount walkways, snow guards, solar panels and other mechanical equipment tosnap-lockand somesingle-foldmetal roof profiles. Although theS-5-Uwill work on these profiles,theS is a better fit and lower-cost solution.

Use on vertical snap-together profiles
Use on single-folded with horizontal projection (horizontal seams) under 0.54 (13 mm)
Utility mounting and otherlight and medium-dutyapplications
Smaller than the standard S-5-S
One T-30 Torx round-point setscrew (Torx bit tip provided)
No M8 bolt included