Ultracolor Plus FA Rapid-Setting Grout (Iron, 25 lb)

Premium, fine-aggregate, fast-setting cement grout for tile and stone joints 1/16″ to 3/4″. Features DropEffect technology for reduced surface absorption and stain resistance, with color-consistent, efflorescence-free performanceno sealer typically required.

Key Features:

• Rapid-Setting Performance: Fast installation with walkable floors in hours
• Fine Aggregate Formula: Designed for narrow joints and easier cleanability
• DropEffect Technology: Repels water, dirt and grime to minimize staining
• Color-Consistent & Efflorescence-Free: HCT polymer-modified cement eliminates common grout issues
• All-in-One Versatility: Suitable for joints from 1/16″ to 3/4″ without a separate sealer

Specifications Table:

Frequently Asked Questions (FAQ):

Q: Do I need to seal Ultracolor Plus FA?
A: A separate sealer is typically not required due to DropEffect and low absorption properties.

Q: What joint widths is this grout suitable for?
A: From 1/16 inch to 3/4 inch (1.5 to 19 mm).

Q: How quickly can surfaces be put into service?
A: It is a rapid-setting grout; floors are typically walkable within hours depending on conditions.

Q: Is it appropriate for high-moisture areas?
A: Yes, its reduced absorption and stain resistance make it suitable for wet areas when installed per instructions.

Q: What color is this product?
A: Color 5107 Iron from MAPEIs Ultracolor Plus FA palette.

Sleek, Consistent Grout that Elevates Every Tile Line

Ultracolor Plus FA in Iron frames tilework with a refined, uniform tone that feels tailored and modern. The fine aggregate and DropEffect finish keep joints crisp and clean, letting patterns and stone shine. Pair Iron with charcoal porcelains or patterned encaustics for striking contrast that still reads cohesive. Its a quiet luxury detail that makes spaces feel polished and enduring.

Choose Ultracolor Plus FA in Iron for fast, clean, color-consistent joints that elevate your tile installation.