KILARGO IS8530SI HEAVY DUTY FULLY MORTISED SEAL (1500MM CUTS BACK TO 1220MM)

Kilargo

KILARGO IS8530SI HEAVY DUTY FULLY MORTISED SEAL (1500MM CUTS BACK TO 1220MM)

The Kilargo IS8530si is a heavy-duty automatic door bottom seal for high-performance acoustic door systems, fully mortised into the bottom of single-action doors for a completely concealed finish. Its parallel-motion mechanism drops the gasket evenly along the door width, sealing gaps of 615 mm against sound, fire, smoke and draughts.

Acoustic gradeFully mortised (concealed)Parallel-motion dropGap 615mmFire & smoke rated

Key Features

Parallel-motion drop for even, full-length gasket compression premium acoustic performanceFully concealed in a 43mm deep x 21mm wide machined grooveScrew-fixed cast-aluminium end plates for maximum service lifeAdjustable brass strike button; certified GVYI/GVWZ/GVWZ7.R26629Eight standard lengths 5201500mm, all cut-back on siteFire, smoke and acoustic tested for certified doorsetsDurability tested beyond 1,000,000 cycles; Australian made

What It’s Used For

Choose the IS8530si where you need the acoustic performance of the IS8520si with nothing visible on the door face premium apartments, hotels, studios, courtrooms, theatres and executive offices. It features in Kilargo’s tested acoustic doorset systems for 4664mm acoustic doors.

Full fire and smoke approvals mean the same concealed seal satisfies fire-door, smoke-door and acoustic requirements in one installation.

Specifications

Compliance & What It Means

Fire tested AS 1530.4 / AS 1905.1. Fire tested to AS 1530.4 (the Australian standard fire-resistance test) in accordance with AS 1905.1, the standard for fire-rated doorsets. In plain terms: this seal has been proven on proprietary fire door assemblies, so it can be specified on fire doors without compromising the door’s fire rating.Certified GVYI.R26629, GVWZ.R26629, GVWZ7.R26629. Carries independent product certifications (GVYI.R26629, GVWZ.R26629, GVWZ7.R26629), giving certifiers and building surveyors documented evidence of compliance.Smoke tested AS 1530.7 / AS 6905. Holds medium-temperature (200C) smoke leakage approvals to AS 1530.7, compliant with AS 6905 on proprietary door assemblies. This is the test the BCA relies on for smoke doors it verifies the seal keeps hot, toxic smoke from leaking past the door for the required 30 minutes.Smoke sealing BCA/NCC Specification C3.4. Conforms with Building Code of Australia (NCC) Specification C3.4 smoke sealing requirements. Smoke not flame is the biggest killer in building fires, and C3.4 sets out how door gaps must be sealed so escape routes stay clear of smoke.Acoustic tested AS 1191 / ISO 140-3 / ISO 10140-2. Acoustically tested in accordance with AS 1191, ISO 140-3 and ISO 10140-2 the laboratory standards for measuring sound insulation. Correctly sealed doors are the difference between a quiet room and a noisy one; this seal is proven to cut sound leakage through the door gaps.Durability 1,000,000+ cycles. Durability tested through more than 1,000,000 open-and-close cycles engineered for decades of service in high-traffic commercial buildings.Antimicrobial option available. Also offered in an antimicrobial (AM) silicone version, formulated to inhibit the growth of bacteria and mould on the gasket surface specified in hospitals, aged care, laboratories and food-preparation areas.

Fire and smoke approvals apply to tested, proprietary door assemblies. Always confirm suitability for your specific door type and required rating with your fire door manufacturer or building certifier.

Ordering & dispatch. This is a non-stocked, specialty architectural item ordered directly from the Kilargo factory line. Please allow a standard handling time of 58 business days after cleared payment before dispatch. Need it sooner, or not sure which seal suits your door? Call Prime Hardware on 1800 329 028.