KILARGO KP3004AS RIGID INTUMESCENT FIRE & SMOKE SEAL

Kilargo

KILARGO KP3004AS RIGID INTUMESCENT FIRE & SMOKE SEAL

The Kilargo KP3004AS is a rigid intumescent fire & smoke seal with an offset elastomeric smoke/acoustic fin on a 30 mm intumescent body. Rebated into the door or frame, the sodium-silicate core seals the perimeter under fire conditions while the fin wipes the closing door daily for smoke and sound control.

30mm x 4mmOffset smoke finFire + smoke in oneFire rated 2hr

Key Features

One seal only for fire and all temperatures of smokeOffset co-extruded fin provides smoke and acoustic sealing every dayHigh-performance sodium-silicate intumescent core in rigid flame-retardant PVCRebated flush into the door or frame for longevity in serviceAggressive self-adhesive tape backingSmoke approvals to AS 1530.7 / AS 6905; conforms with BCA C3.4; acoustically tested100,000+ cycle durability without significant wear; Australian made

What It’s Used For

Use the KP3004AS on doors that must be both fire doors and smoke doors corridor, stair and compartment doors in hospitals, hotels, aged care and apartments with one rebated seal doing both jobs instead of two products.

Pair with a Kilargo automatic door bottom seal to complete the fire/smoke doorset.

Specifications

Compliance & What It Means

Fire rated AS 1530.4 / AS 1905.1 (up to 2 hours). Fully tested to AS 1530.4 for up to 2 hours on proprietary fire door assemblies in accordance with AS 1905.1. In a fire, the intumescent core expands to many times its size and seals the gap, blocking flames, heat and hot toxic gases keeping the door assembly’s fire rating intact.Smoke tested AS 1530.7 / AS 6905. Holds medium-temperature (200C) smoke leakage approvals to AS 1530.7, compliant with AS 6905 on proprietary door assemblies. This is the test the BCA relies on for smoke doors it verifies the seal keeps hot, toxic smoke from leaking past the door for the required 30 minutes.Smoke sealing BCA/NCC Specification C3.4. Conforms with Building Code of Australia (NCC) Specification C3.4 smoke sealing requirements. Smoke not flame is the biggest killer in building fires, and C3.4 sets out how door gaps must be sealed so escape routes stay clear of smoke.Acoustic tested AS 1191 / ISO 140-3 / ISO 10140-2. Acoustically tested in accordance with AS 1191, ISO 140-3 and ISO 10140-2 the laboratory standards for measuring sound insulation. Correctly sealed doors are the difference between a quiet room and a noisy one; this seal is proven to cut sound leakage through the door gaps.Durability 100,000+ cycles. Durability tested through more than 100,000 open-and-close cycles, so it keeps performing in busy commercial and residential doorways.

Fire and smoke approvals apply to tested, proprietary door assemblies. Always confirm suitability for your specific door type and required rating with your fire door manufacturer or building certifier.

Ordering & dispatch. This is a non-stocked, specialty architectural item ordered directly from the Kilargo factory line. Please allow a standard handling time of 58 business days after cleared payment before dispatch. Need it sooner, or not sure which seal suits your door? Call Prime Hardware on 1800 329 028.