Name: Zanda Bearing Hinges SS 100x75mm and 100x100mm Fixed and Loose Pin
SKU: I134101112907
Availability: InStock

Description
Reviews (0)

Zanda

Zanda Bearing Hinges SS 100x75mm and 100x100mm Fixed and Loose Pin

Product code (SKU): 5904.SS5927.1.SS (by finish / function)

Zanda Bearing Hinges in stainless steel for external and heavy-use doors. Available in 100x75mm (5904/5905) and 100x100mm (5927).

Stainless SteelMaterialSTAINLESS STEELFinish

Fixing Types Explained

Fixing	What it means
Back to Back (Pair)	Two handles fixed through the door, one each side, bolted to each other. The strongest fixing and the usual choice for entry doors.
Face Fix (Single)	A single handle fixed from the front, with the screws visible on the face of the handle.
Rear Fix (Single)	A single handle fixed from behind the door, so no screws are visible on the handle face.

Available Finishes (1) & Product Codes

STAINLESS STEEL

Finish	5904 – 100x75x3mm Fixed Pin	5905 – 100x75x3mm Loose Pin	5927 – 100x100x3mm Fixed Pin
STAINLESS STEEL	5904.SS	5905.SS	5927.1.SS

Living finishes such as Polished and Brushed Brass develop a natural patina over time.

Hinge Type: Loose pin hinge

The pin can be withdrawn so the door lifts off without unscrewing the hinge. Internal use handy for bathrooms and for removing doors during work.

Hinge types explained:

Hinge type	What it does
Parliament hinge	Projects the door clear of the frame or architrave so it can swing back fully against the wall used where a door must open 180 or clear deep reveals.
Ball bearing hinge	Bearings between the knuckles carry the load, reducing friction and wear. Best for heavy and high-use doors, including entrance doors.
Loose pin hinge	The pin can be withdrawn so the door lifts off without unscrewing the hinge. Internal use handy for bathrooms and for removing doors during work.
Fixed pin hinge	The pin is fixed in the knuckle. A reliable all-rounder for most internal doors.
Butt hinge	The standard door hinge, mortised into the door edge and frame.
Lift-off hinge	The leaves separate so the door lifts off. Handed order left or right hand to suit the door.

Three hinges per door is standard for internal and entrance doors. Heavier and taller doors may require a fourth.

Specifications

Material	Stainless Steel
Finishes	STAINLESS STEEL
Fire Rating	Fire rated see product data
Warranty	10-Year Mechanical Warranty

Warranty

Mechanical Warranty

Zanda hardware is warranted against defects in materials and workmanship under normal use, when correctly installed. The warranty period varies by product range.

Finish care

Wipe with a soft, damp cloth. Avoid abrasive cleaners. Living finishes develop a natural patina over time.

Add a Review

Your email address will not be published. Required fields are marked *